Debian 5.0 sem portas usb

Mesmo com um dispositivo usb ligado como a minha impressora ou uma pen nada acontece.... na consola após digitar o comando "lsusb" nada acontece o cursor fica a piscar e nada acontece...
mais ideias???
 

não é um portátil, é um desktop
já uso linux há uns anos e nunca me tinha deparado com um stress destes
e sim eu axo que as portas usb nao sao reconhecidas, mas qd eu faço um restart e vou para o boot menu, e tenho uma pen numa porta usb ele dá-me a hipótese de arrancar desse device.
de qq maneira aqui está o resultado do dmesg:
[    0.000000] Initializing cgroup subsys cpuset[    0.000000] Initializing cgroup subsys cpu[    0.000000] Linux version 2.6.26-1-686 (Debian 2.6.26-13) (waldi@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-24)) #1 SMP Sat Jan 10 18:29:31 UTC 2009[    0.000000] BIOS-provided physical RAM map:[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)[    0.000000]  BIOS-e820: 0000000000100000 - 000000003fef0000 (usable)[    0.000000]  BIOS-e820: 000000003fef0000 - 000000003fef3000 (ACPI NVS)[    0.000000]  BIOS-e820: 000000003fef3000 - 000000003ff00000 (ACPI data)[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)[    0.000000] 126MB HIGHMEM available.[    0.000000] 896MB LOWMEM available.[    0.000000] found SMP MP-table at [c00f48c0] 000f48c0[    0.000000] Entering add_active_range(0, 0, 261872) 0 entries of 256 used[    0.000000] Zone PFN ranges:[    0.000000]   DMA             0 ->     4096[    0.000000]   Normal       4096 ->   229376[    0.000000]   HighMem    229376 ->   261872[    0.000000] Movable zone start PFN for each node[    0.000000] early_node_map[1] active PFN ranges[    0.000000]     0:        0 ->   261872[    0.000000] On node 0 totalpages: 261872[    0.000000]   DMA zone: 32 pages used for memmap[    0.000000]   DMA zone: 0 pages reserved[    0.000000]   DMA zone: 4064 pages, LIFO batch:0[    0.000000]   Normal zone: 1760 pages used for memmap[    0.000000]   Normal zone: 223520 pages, LIFO batch:31[    0.000000]   HighMem zone: 254 pages used for memmap[    0.000000]   HighMem zone: 32242 pages, LIFO batch:7[    0.000000]   Movable zone: 0 pages used for memmap[    0.000000] DMI 2.4 present.[    0.000000] ACPI: RSDP 000F87E0, 0014 (r0 HP-CPC)[    0.000000] ACPI: RSDT 3FEF3040, 0038 (r1 HP-CPC AWRDACPI 42302E31 AWRD        0)[    0.000000] ACPI: FACP 3FEF30C0, 0084 (r2 HP-CPC AWRDACPI 42302E31 AWRD        0)[    0.000000] ACPI: DSDT 3FEF31C0, 3A20 (r1 HP-CPC AWRDACPI     1000 MSFT  100000E)[    0.000000] ACPI: FACS 3FEF0000, 0040[    0.000000] ACPI: SSDT 3FEF6D00, 00D6 (r1 HP-CPC POWERNOW        1  LTP        1)[    0.000000] ACPI: SRAT 3FEF6E40, 0090 (r1 HP-CPC HAMMER          1 AMD         1)[    0.000000] ACPI: MCFG 3FEF6F40, 003C (r1 HP-CPC AWRDACPI 42302E31 AWRD        0)[    0.000000] ACPI: APIC 3FEF6C40, 0068 (r1 HP-CPC AWRDACPI 42302E31 AWRD        0)[    0.000000] ATI board detected. Disabling timer routing over 8254.[    0.000000] ACPI: PM-Timer IO Port: 0x4008[    0.000000] ACPI: Local APIC address 0xfee00000[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])[    0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)[    0.000000] ACPI: IRQ0 used by override.[    0.000000] ACPI: IRQ2 used by override.[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs[    0.000000] Using ACPI (MADT) for SMP configuration information[    0.000000] Allocating PCI resources starting at 40000000 (gap: 3ff00000:a0100000)[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000[    0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs[    0.000000] PERCPU: Allocating 37960 bytes of per cpu data[    0.000000] NR_CPUS: 8, nr_cpu_ids: 2[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 259826[    0.000000] Kernel command line: root=/dev/sda1 ro quiet[    0.000000] mapped APIC to ffffb000 (fee00000)[    0.000000] mapped IOAPIC to ffffa000 (fec00000)[    0.000000] Enabling fast FPU save and restore... done.[    0.000000] Enabling unmasked SIMD FPU exception support... done.[    0.000000] Initializing CPU#0[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)[    0.000000] Detected 1989.903 MHz processor.[    0.004000] Console: colour VGA+ 80x25[    0.004000] console [tty0] enabled[    0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)[    0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)[    0.004000] Memory: 1028464k/1047488k available (1769k kernel code, 18396k reserved, 752k data, 244k init, 129984k highmem)[    0.004000] virtual kernel memory layout:[    0.004000]     fixmap  : 0xfff4c000 - 0xfffff000   ( 716 kB)[    0.004000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)[    0.004000]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)[    0.004000]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)[    0.004000]       .init : 0xc037f000 - 0xc03bc000   ( 244 kB)[    0.004000]       .data : 0xc02ba4ab - 0xc0376620   ( 752 kB)[    0.004000]       .text : 0xc0100000 - 0xc02ba4ab   (1769 kB)[    0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.[    0.004000] CPA: page pool initialized 1 of 1 pages preallocated[    0.084049] Calibrating delay using timer specific routine.. 3984.00 BogoMIPS (lpj=7968017)[    0.084086] Security Framework initialized[    0.084093] SELinux:  Disabled at boot.[    0.084096] Capability LSM initialized[    0.084111] Mount-cache hash table entries: 512[    0.084259] Initializing cgroup subsys ns[    0.084263] Initializing cgroup subsys cpuacct[    0.084266] Initializing cgroup subsys devices[    0.084286] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)[    0.084289] CPU: L2 Cache: 512K (64 bytes/line)[    0.084293] Intel machine check architecture supported.[    0.084296] Intel machine check reporting enabled on CPU#0.[    0.084308] Checking 'hlt' instruction... OK.[    0.100261] SMP alternatives: switching to UP code[    0.106386] ACPI: Core revision 20080321[    0.116007] ENABLING IO-APIC IRQs[    0.116007] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1[    0.116007] ..MP-BIOS bug: 8254 timer not connected to IO-APIC[    0.116007] ...trying to set up timer (IRQ0) through the 8259A ...  failed.[    0.116007] ...trying to set up timer as Virtual Wire IRQ... works.[    0.156849] CPU0: AMD Athlon(tm) 64 Processor 3200+ stepping 00[    0.160010] Brought up 1 CPUs[    0.160010] Total of 1 processors activated (3984.00 BogoMIPS).[    0.160010] CPU0 attaching sched-domain:[    0.160010]  domain 0: span 0[    0.160010]   groups: 0[    0.160010] net_namespace: 660 bytes[    0.160010] Booting paravirtualized kernel on bare hardware[    0.160010] NET: Registered protocol family 16[    0.160010] ACPI: bus type pci registered[    0.160010] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255[    0.160010] PCI: MCFG area at e0000000 reserved in E820[    0.160010] PCI: Using MMCONFIG for extended config space[    0.160010] PCI: Using configuration type 1 for base access[    0.160010] Setting up standard PCI resources[    0.160477] ACPI: EC: Look up EC in DSDT[    0.164000] ACPI: Interpreter enabled[    0.164003] ACPI: (supports S0 S1 S3 S4 S5)[    0.164020] ACPI: Using IOAPIC for interrupt routing[    0.167562] ACPI: PCI Root Bridge [PCI0] (0000:00)[    0.169061] PCI: Transparent bridge - 0000:00:14.4[    0.169091] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT][    0.169302] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT][    0.183286] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.[    0.183375] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.[    0.183462] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.[    0.183549] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.[    0.183637] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11)[    0.183724] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 7 10 11)[    0.183810] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 *11)[    0.183897] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.[    0.184043] Linux Plug and Play Support v0.97 (c) Adam Belay[    0.184069] pnp: PnP ACPI init[    0.184076] ACPI: bus type pnp registered[    0.186171] pnp 00:0a: mem resource (0xe0000000-0xefffffff) overlaps 0000:00:00.0 BAR 3 (0xe0000000-0xffffffff), disabling[    0.186434] pnp 00:0b: mem resource (0xffff0000-0xffffffff) overlaps 0000:00:00.0 BAR 3 (0xe0000000-0xffffffff), disabling[    0.186439] pnp 00:0b: mem resource (0xfec00000-0xfec00fff) overlaps 0000:00:00.0 BAR 3 (0xe0000000-0xffffffff), disabling[    0.186443] pnp 00:0b: mem resource (0xfee00000-0xfee00fff) overlaps 0000:00:00.0 BAR 3 (0xe0000000-0xffffffff), disabling[    0.186446] pnp 00:0b: mem resource (0xfff80000-0xfffeffff) overlaps 0000:00:00.0 BAR 3 (0xe0000000-0xffffffff), disabling[    0.186516] pnp: PnP ACPI: found 12 devices[    0.186518] ACPI: ACPI bus type pnp unregistered[    0.186521] PnPBIOS: Disabled by ACPI PNP[    0.186716] PCI: Using ACPI for IRQ routing[    0.186724] PCI: Cannot allocate resource region 3 of device 0000:00:00.0[    0.186993] ACPI: RTC can wake from S4[    0.187013] system 00:01: ioport range 0x228-0x22f has been reserved[    0.187016] system 00:01: ioport range 0x40b-0x40b has been reserved[    0.187019] system 00:01: ioport range 0x4d6-0x4d6 has been reserved[    0.187022] system 00:01: ioport range 0xc00-0xc01 has been reserved[    0.187025] system 00:01: ioport range 0xc14-0xc14 has been reserved[    0.187028] system 00:01: ioport range 0xc50-0xc52 has been reserved[    0.187030] system 00:01: ioport range 0xc6c-0xc6d has been reserved[    0.187033] system 00:01: ioport range 0xc6f-0xc6f has been reserved[    0.187036] system 00:01: ioport range 0xcd4-0xcdf has been reserved[    0.187039] system 00:01: ioport range 0x4000-0x40fe has been reserved[    0.187042] system 00:01: ioport range 0x4210-0x4217 has been reserved[    0.187051] system 00:06: ioport range 0x4d0-0x4d1 has been reserved[    0.187054] system 00:06: ioport range 0x800-0x87f has been reserved[    0.187066] system 00:0b: iomem range 0xf0000-0xf3fff could not be reserved[    0.187069] system 00:0b: iomem range 0xf4000-0xf7fff could not be reserved[    0.187072] system 00:0b: iomem range 0xf8000-0xfbfff could not be reserved[    0.187075] system 00:0b: iomem range 0xfc000-0xfffff could not be reserved[    0.187078] system 00:0b: iomem range 0x3ff00000-0x3fffffff has been reserved[    0.187081] system 00:0b: iomem range 0x3fef0000-0x3fefffff could not be reserved[    0.187084] system 00:0b: iomem range 0x0-0x9ffff could not be reserved[    0.187087] system 00:0b: iomem range 0x100000-0x3feeffff could not be reserved[    0.217422] PCI: Bridge: 0000:00:02.0[    0.217425]   IO window: e000-efff[    0.217428]   MEM window: 0xfdd00000-0xfddfffff[    0.217431]   PREFETCH window: 0x00000000d0000000-0x00000000dfffffff[    0.217436] PCI: Bridge: 0000:00:14.4[    0.217439]   IO window: d000-dfff[    0.217446]   MEM window: 0xfdc00000-0xfdcfffff[    0.217451]   PREFETCH window: 0x00000000fde00000-0x00000000fdefffff[    0.217466] PCI: Setting latency timer of device 0000:00:02.0 to 64[    0.217505] NET: Registered protocol family 2[    0.217597] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)[    0.217971] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)[    0.219141] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)[    0.219759] TCP: Hash tables configured (established 131072 bind 65536)[    0.219762] TCP reno registered[    0.219884] NET: Registered protocol family 1[    0.219996] checking if image is initramfs...<7>Switched to high resolution mode on CPU 0[    0.443116]  it is[    0.700245] Freeing initrd memory: 6060k freed[    0.700993] audit: initializing netlink socket (disabled)[    0.701007] type=2000 audit(1236290394.700:1): initialized[    0.701179] highmem bounce pool size: 64 pages[    0.701183] Total HugeTLB memory allocated, 0[    0.701284] VFS: Disk quotas dquot_6.5.1[    0.701317] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)[    0.701356] msgmni has been set to 1767[    0.701479] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)[    0.701482] io scheduler noop registered[    0.701484] io scheduler anticipatory registered[    0.701486] io scheduler deadline registered[    0.701501] io scheduler cfq registered (default)[    0.701508] pci 0000:00:00.0: MSI quirk detected; MSI disabled[    0.757789] pci 0000:01:00.0: Boot video device[    0.757880] PCI: Setting latency timer of device 0000:00:02.0 to 64[    0.757904] assign_interrupt_mode Found MSI capability[    0.757908] Allocate Port Service[0000:00:02.0:pcie00][    0.757947] Allocate Port Service[0000:00:02.0:pcie01][    0.757983] Allocate Port Service[0000:00:02.0:pcie03][    0.759101] AER service couldn't init device 0000:00:02.0:pcie01 - no _OSC support[    0.759309] isapnp: Scanning for PnP cards...[    1.113503] isapnp: No Plug & Play device found[    1.116007] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled[    1.116576] brd: module loaded[    1.116666] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12[    1.119666] serio: i8042 KBD port at 0x60,0x64 irq 1[    1.119672] serio: i8042 AUX port at 0x60,0x64 irq 12[    1.119828] mice: PS/2 mouse device common for all mice[    1.119957] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0[    1.119979] rtc0: alarms up to one month[    1.120025] cpuidle: using governor ladder[    1.120027] cpuidle: using governor menu[    1.120031] No iBFT detected.[    1.120504] TCP cubic registered[    1.120507] NET: Registered protocol family 17[    1.120513] Using IPI No-Shortcut mode[    1.120631] registered taskstats version 1[    1.120785] rtc_cmos 00:03: setting system clock to 2009-03-05 21:59:56 UTC (1236290396)[    1.121034] Freeing unused kernel memory: 244k freed[    1.141747] input: AT Translated Set 2 keyboard as /class/input/input0[    1.215287] ACPI: ACPI0007:00 is registered as cooling_device0[    1.215292] ACPI: Processor [CPU0] (supports 8 throttling states)[    1.758791] No dock devices found.[    1.780296] SCSI subsystem initialized[    1.804476] libata version 3.00 loaded.[    1.816164] sata_sil 0000:00:12.0: version 2.3[    1.816222] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 22[    1.821679] usbcore: registered new interface driver usbfs[    1.821704] usbcore: registered new interface driver hub[    1.821752] usbcore: registered new device driver usb[    1.822734] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver[    1.823938] scsi0 : sata_sil[    1.824069] scsi1 : sata_sil[    1.824143] ata1: SATA max UDMA/100 mmio m512@0xfe02f000 tf 0xfe02f080 irq 22[    1.824147] ata2: SATA max UDMA/100 mmio m512@0xfe02f000 tf 0xfe02f0c0 irq 22[    1.880673] Uniform Multi-Platform E-IDE driver[    1.880679] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx[    1.971551] 8139too Fast Ethernet driver 0.9.28[    2.144072] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)[    2.152502] ata1.00: ATA-7: ST3160023AS, 3.43, max UDMA/100[    2.152506] ata1.00: 312581808 sectors, multi 16: LBA48 [    2.168491] ata1.00: configured for UDMA/100[    2.488041] ata2: SATA link down (SStatus 0 SControl 300)[    2.488147] scsi 0:0:0:0: Direct-Access     ATA      ST3160023AS      3.43 PQ: 0 ANSI: 5[    2.488388] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19[    2.488405] ohci_hcd 0000:00:13.0: OHCI Host Controller[    2.488525] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1[    2.488548] ohci_hcd 0000:00:13.0: irq 19, io mem 0xfe02e000[    2.548075] usb usb1: configuration #1 chosen from 1 choice[    2.548100] hub 1-0:1.0: USB hub found[    2.548114] hub 1-0:1.0: 4 ports detected[    2.652096] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001[    2.652099] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1[    2.652102] usb usb1: Product: OHCI Host Controller[    2.652103] usb usb1: Manufacturer: Linux 2.6.26-1-686 ohci_hcd[    2.652105] usb usb1: SerialNumber: 0000:00:13.0[    2.652180] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 19[    2.652189] ohci_hcd 0000:00:13.1: OHCI Host Controller[    2.652207] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2[    2.652221] ohci_hcd 0000:00:13.1: irq 19, io mem 0xfe02d000[    2.712093] usb usb2: configuration #1 chosen from 1 choice[    2.712120] hub 2-0:1.0: USB hub found[    2.712132] hub 2-0:1.0: 4 ports detected[    2.816090] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001[    2.816093] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1[    2.816096] usb usb2: Product: OHCI Host Controller[    2.816098] usb usb2: Manufacturer: Linux 2.6.26-1-686 ohci_hcd[    2.816100] usb usb2: SerialNumber: 0000:00:13.1[    2.816197] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 19[    2.816213] ehci_hcd 0000:00:13.2: EHCI Host Controller[    2.816233] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3[    2.816286] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe02c000[    2.956024] usb 1-3: new full speed USB device using ohci_hcd and address 2[    2.968024] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004[    2.968073] usb usb3: configuration #1 chosen from 1 choice[    2.968098] hub 3-0:1.0: USB hub found[    2.968104] hub 3-0:1.0: 8 ports detected[    3.024026] hub 1-0:1.0: unable to enumerate USB device on port 3[    3.072086] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002[    3.072089] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1[    3.072091] usb usb3: Product: EHCI Host Controller[    3.072093] usb usb3: Manufacturer: Linux 2.6.26-1-686 ehci_hcd[    3.072095] usb usb3: SerialNumber: 0000:00:13.2[    3.076677] ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 20 (level, low) -> IRQ 20[    3.077905] eth0: RealTek RTL8139 at 0xdd00, 00:13:d3:28:d7:4d, IRQ 20[    3.077907] eth0:  Identified 8139 chip type 'RTL-8100B/8139D'[    3.077952] ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 21 (level, low) -> IRQ 21[    3.130743] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21]  MMIO=[fdcfd000-fdcfd7ff]  Max Packet=[2048]  IR/IT contexts=[4/8][    3.136925] ATIIXP: IDE controller (0x1002:0x4376 rev 0x00) at  PCI slot 0000:00:14.1[    3.136940] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16[    3.136948] ATIIXP: not 100% native mode: will probe irqs later[    3.136960]     ide0: BM-DMA at 0xf800-0xf807[    3.136970]     ide1: BM-DMA at 0xf808-0xf80f[    3.136976] Probing IDE interface ide0...[    3.147619] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)[    3.174584] Driver 'sd' needs updating - please use bus_type methods[    3.174693] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)[    3.174717] sd 0:0:0:0: [sda] Write Protect is off[    3.174720] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00[    3.174760] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA[    3.174827] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)[    3.174849] sd 0:0:0:0: [sda] Write Protect is off[    3.174851] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00[    3.174890] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA[    3.174893]  sda: sda1 sda2 < sda5 >[    3.212395] sd 0:0:0:0: [sda] Attached SCSI disk[    3.436030] usb 3-5: new high speed USB device using ehci_hcd and address 2[    3.571966] usb 3-5: configuration #1 chosen from 1 choice[    3.572411] usb 3-5: New USB device found, idVendor=0930, idProduct=6545[    3.572414] usb 3-5: New USB device strings: Mfr=0, Product=2, SerialNumber=3[    3.572417] usb 3-5: Product: USB Flash Memory[    3.572419] usb 3-5: SerialNumber: 0A00B470A131F8F5[    3.598310] Initializing USB Mass Storage driver...[    3.598418] scsi2 : SCSI emulation for USB Mass Storage devices[    3.598501] usbcore: registered new interface driver usb-storage[    3.598504] USB Mass Storage support registered.[    3.598584] usb-storage: device found at 2[    3.598586] usb-storage: waiting for device to settle before scanning[    3.704059] Probing IDE interface ide1...[    4.420141] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0010dc0000aeb8a4][    4.440438] hdc: TSSTcorpCD/DVDW TS-H552B, ATAPI CD/DVD-ROM drive[    5.224437] hdd: IDE-DVD DROM6216, ATAPI CD/DVD-ROM drive[    5.280060] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4[    5.280171] hdc: UDMA/33 mode selected[    5.280318] hdd: host max PIO4 wanted PIO255(auto-tune) selected PIO4[    5.280613] hdd: host side 80-wire cable detection failed, limiting max speed to UDMA33[    5.280615] hdd: UDMA/33 mode selected[    5.281958] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14[    5.281999] ide1 at 0x170-0x177,0x376 on irq 15[    5.323014] hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache[    5.323021] Uniform CD-ROM driver Revision: 3.20[    5.325606] hdd: ATAPI 40X DVD-ROM drive, 512kB Cache[    5.396045] PM: Starting manual resume from disk[    5.432030] kjournald starting.  Commit interval 5 seconds[    5.432030] EXT3-fs: mounted filesystem with ordered data mode.[    7.048391] udevd version 125 started[    7.976264] Linux agpgart interface v0.103[    8.233594] input: Power Button (FF) as /class/input/input1[    8.263376] ACPI: Power Button (FF) [PWRF][    8.263441] input: Power Button (CM) as /class/input/input2[    8.284076] ACPI: Power Button (CM) [PWRB][    8.596755] usb-storage: device scan complete[    8.613388] scsi 2:0:0:0: Direct-Access              USB Flash Memory 5.00 PQ: 0 ANSI: 0 CCS[    8.666087] sd 2:0:0:0: [sdb] 2013184 512-byte hardware sectors (1031 MB)[    8.666628] sd 2:0:0:0: [sdb] Write Protect is off[    8.666631] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00[    8.666634] sd 2:0:0:0: [sdb] Assuming drive cache: write through[    8.672753] sd 2:0:0:0: [sdb] 2013184 512-byte hardware sectors (1031 MB)[    8.673370] sd 2:0:0:0: [sdb] Write Protect is off[    8.673373] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00[    8.673375] sd 2:0:0:0: [sdb] Assuming drive cache: write through[    8.673436]  sdb: sdb1[    8.674216] sd 2:0:0:0: [sdb] Attached SCSI removable disk[    8.813063] ACPI: PCI Interrupt 0000:01:00.1[B] -> GSI 18 (level, low) -> IRQ 18[    8.813090] PCI: Setting latency timer of device 0000:01:00.1 to 64[    9.853961] hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x000f0000[    9.995026] irq 19: nobody cared (try booting with the "irqpoll" option)[    9.995083] Pid: 1345, comm: udevd Not tainted 2.6.26-1-686 #1[    9.995087]  [<c015280b>] __report_bad_irq+0x24/0x69[    9.995101]  [<c0152812>] __report_bad_irq+0x2b/0x69[    9.995105]  [<c0152a24>] note_interrupt+0x1d4/0x208[    9.995112]  [<c0151fd2>] handle_IRQ_event+0x23/0x51[    9.995119]  [<c01530e5>] handle_fasteoi_irq+0x85/0xa4[    9.995125]  [<c0105f3a>] do_IRQ+0x4d/0x63[    9.995132]  [<c01042a7>] common_interrupt+0x23/0x28[    9.995149]  =======================[    9.995151] handlers:[    9.995198] [<f88ad07f>] (usb_hcd_irq+0x0/0x73 [usbcore])[    9.995348] [<f88ad07f>] (usb_hcd_irq+0x0/0x73 [usbcore])[    9.995493] [<f88ad07f>] (usb_hcd_irq+0x0/0x73 [usbcore])[    9.995638] Disabling IRQ #19[   10.476342] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device[   10.494210] input: PC Speaker as /class/input/input3[   10.645270] cannot find the slot for index 0 (range 0-0), error: -16[   10.645329] ATI IXP AC97 controller: probe of 0000:00:14.5 failed with error -12[   11.348146] input: ImExPS/2 Generic Explorer Mouse as /class/input/input4[   11.411672] parport_pc 00:07: reported by Plug and Play ACPI[   11.411719] parport0: PC-style at 0x378, irq 7 [PCSPP,EPP][   41.088027] usb 3-5: reset high speed USB device using ehci_hcd and address 2[   56.644021] usb 3-5: device not accepting address 2, error -110[   56.756023] usb 3-5: reset high speed USB device using ehci_hcd and address 2[   72.312025] usb 3-5: device not accepting address 2, error -110[   72.424023] usb 3-5: reset high speed USB device using ehci_hcd and address 2[   82.856021] usb 3-5: device not accepting address 2, error -110[   82.968024] usb 3-5: reset high speed USB device using ehci_hcd and address 2[   93.400026] usb 3-5: device not accepting address 2, error -110[   93.400137] sd 2:0:0:0: Device offlined - not ready after error recovery[   93.403030] usb 3-5: USB disconnect, address 2[   93.512037] usb 3-5: new high speed USB device using ehci_hcd and address 3[   94.268248] Adding 2650684k swap on /dev/sda5.  Priority:-1 extents:1 across:2650684k[   94.652562] EXT3 FS on sda1, internal journal[   95.140789] loop: module loaded[   96.585437] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1[   97.638415] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ processors (1 cpu cores) (version 2.20.00)[   97.638450] powernow-k8:    0 : fid 0xc (2000 MHz), vid 0x6[   97.638453] powernow-k8:    1 : fid 0xa (1800 MHz), vid 0x8[   97.638455] powernow-k8:    2 : fid 0x2 (1000 MHz), vid 0x12[   99.103189] NET: Registered protocol family 10[   99.103677] lo: Disabled Privacy Extensions[   99.432016] lp0: using parport0 (interrupt-driven).[   99.447448] ppdev: user-space parallel port driver[  100.716030] Clocksource tsc unstable (delta = -250007765 ns)[  109.076026] usb 3-5: device not accepting address 3, error -110[  109.188030] usb 3-5: new high speed USB device using ehci_hcd and address 4[  117.500024] eth0: no IPv6 routers present[  124.744030] usb 3-5: device not accepting address 4, error -110[  124.856035] usb 3-5: new high speed USB device using ehci_hcd and address 5[  135.288032] usb 3-5: device not accepting address 5, error -110[  135.400036] usb 3-5: new high speed USB device using ehci_hcd and address 6[  145.832025] usb 3-5: device not accepting address 6, error -110[  145.832057] hub 3-0:1.0: unable to enumerate USB device on port 5[69946.670986] ACPI: PCI interrupt for device 0000:01:00.1 disabled[69991.625945] ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 17[295221.329094] UDP: bad checksum. From 59.95.248.178:1076 to 81.84.194.84:7701 ulen 32